| MODEL |
1770NT 16row30 |
| Rows and Row Spacing |
|
| Number of rows |
16 |
| Row spacing, in. (cm) |
30 in. (76) |
| Frame |
|
| Fold configuration |
Front-fold |
| Frame tube size, in. (cm) |
7 x 7 in. (17.8 x 17.8 cm) |
| Fold-and-go from tractor cab |
Base equipment |
| Flexibility |
3-section, 21 degrees up, 21 degrees down to center section |
| Hitch |
|
| Base |
Two point hitch for Cat.II or Cat.III narrow with Quick Coupler only |
| Optional |
Drawbar hitch |
| Rear hitch |
Optional |
| Lift System |
|
| Type |
Phased hydraulic cylinder lift system |
| Number of cylinders |
8 |
| Tires |
|
| Base |
(4) 10.00x15.00 in. F1 Load Range D center section transport, (4) 10.00x15.00 in. F1 Load Range D two on each wing |
| Optional |
NA |
| Quantity |
8 |
| Row Units |
|
| Type |
MaxEmerge™ XP |
| Opener |
Tru-Vee™ double disk w/15-in. blade |
| Depth gauging |
(2) 4-1/2x16-in. semi-pneumatic wheels |
| Adjustment |
T-handle 1/4 to 4-in. with 1/4-in. increments |
| Walking wheels |
Base equipment |
| Row unit seed hoppers |
--- |
| Capacity |
1.6 bu. (.06 cu. m) or 3.0 bu. (.11 cu. m) |
| Material |
1.6 bu. polyethylene or 3.0 bu. roto-molded plastic |
| Row unit down force |
Base equipment |
| Non-adjustable (4 springs) |
--- |
| Adjustable heavy-duty |
--- |
| Pneumatic |
Base, Infinitely adjustable to 400 lb. |
| Scrapers, opener blades |
Optional |
| Plastic rotary |
NA |
| Steel straight blade |
Optional |
| Heavy-duty |
Optional |
| Seed tube sensors |
Base |
| Base |
AccuCount™ |
| Optional |
--- |
| Seed Meters |
|
| Base |
Vacuum |
| Optional |
--- |
| Finger pickup |
Optional |
| Radial bean meter |
--- |
| Central Commodity System |
NA |
| Seed capacity, bu. (cu. m) |
NA |
| Drive System |
|
| Base |
2-motor hydraulic variable-rate drive |
| Optional |
Tire contact drive (chain) |
| Number of drive wheels |
One on center frame |
| Drive wheel disconnect |
Automatic |
| Counter shaft |
7/8 in. hex |
| Drill shaft |
7/8 in. hex |
| Seed transmission |
Rear mounted on center frame |
| Transmission combinations |
50 sprocket combinations |
| Markers |
|
| Type |
Tri-fold |
| Control |
Independent of lift or connected to lift |
| Base |
Independent of lift |
| Optional |
Control connected to planter lift |
| Marker disk |
--- |
| Base |
16 in. notched with depth gauging band |
| Optional |
Marker arm gauge wheel |
| Shear bolt protection |
Base equipment |
| Less marker option |
Optional |
| Closing System |
|
| Rubber tire closing system |
Base equipment |
| Wheel |
(2) 1x12 in. rubber tires w/nylon wheel |
| Position |
In-line or staggered |
| Adjustment |
T-handle |
| Down force |
5 position, 0-145 lb. |
| Alignment |
Adjustable side to side |
| Cast iron closing system |
Optional |
| Wheel |
(2) 1x12 in. cast iron wheel |
| Position |
In-line or staggered |
| Adjustment |
T-handle |
| Herbicide and Insecticide |
|
| Insecticide only hopper |
Optional -- 70 lb. capacity |
| Herbicide only hopper |
NA |
| Insecticide and herbicide hopper |
Optional -- split hopper, 35 lb. each side |
| Liquid Insecticide System |
|
| System available |
NA |
| Tank capacity |
NA |
| Seed Monitor System |
|
| Base |
SeedStar™2 |
| Optional |
SeedStar™ XP |
| Tillage Attachments |
|
| Unit-mounted coulter |
Optional |
| Frame-mounted coulter |
Optional |
| Bubble blade |
Optional |
| .63-in. fluted blade (25 flutes) |
Optional |
| .7-in. fluted blade (13 flutes) |
Optional |
| 1-in. fluted blade (8 flutes) |
--- |
| Row tillage support hanger |
NA |
| Tine tooth |
--- |
| Cons. furrower w/ leading cutout blade |
NA |
| V-wing bed sweeps |
NA |
| Row cleaner |
Optional w/SharkTooth™ wheels |
| Row cleaner - unit-mounted coulter |
Optional w/SharkTooth™ wheels |
| Row cleaner - unit-mounted DD fert. opener |
NA |
| Fertilizer |
|
| Onboard / towed / tractor tanks |
Onboard |
| Tank capacity |
600 gallon tank |
| Fixed-rate application |
Optional |
| Variable-rate application |
Optional |
| Pump type |
Piston pump |
| Pump rate (GPA) |
1.8 gallon to 37.6 gallon acre |
| Fertilizer opener type |
--- |
| Frame-mounted |
Optional frame mounted single disk opener |
| Unit-mounted |
NA |
| Flow divider distribution system |
Optional |
| Pressure manifold distribution system |
Optional |
| Dry fertilizer |
NA |
| Number of hoppers |
NA |
| Hopper capacity |
NA |
| Dimensions |
|
| Transport width (with markers), ft. (m) |
12-ft. 0-in. (3.7 m) |
| Transport width (without markers), ft. (m) |
--- |
| Transport length, ft. (m) |
34-ft. 0-in. (10.3 m) |
| Transport height, ft. (m) |
12-ft. 6-in. (3.81 m) |
| Transport weight, lb. (kg) |
16,974 lb. |
| Transport underframe clearance |
22 in. |
| Field operation width, ft. (m) |
43-ft. 4-in. (13.2 m) |
| Field operation length, ft. (m) |
13-ft. 10-in. (4.2 m) |
| Ag Management Solutions |
|
| Map-based seeding |
Optional |
| Field documentation |
Optional |
| Parallel tracking |
Optional |
| Additional Information |
|
| Recommended tractor horsepower |
155 hp |
| Recommended tractor hydraulics |
3 SCVs with 2250 psi (15514 kPa) operating |
| Warranty length |
1 year |
