| MODEL |
MY11 8335R; 335 engine (276 PTO) hp |
| Official Test |
|
| Nebraska Test Number |
TBD- Nebraska Test |
| Engine |
|
| Manufacturer |
John Deere |
| Aspiration |
Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation |
| Cylinders/Displacement, cu. in. (liters) |
6/548 (9.0) |
| Cylinder Liners |
Wet |
| Fuel Tank Cap., US Gal. (L) (Open; Cab) |
--- |
| Standard |
180 (681) |
| Optional |
N/A |
| Underhood muffler |
N/A |
| Performance |
|
| Advertised PTO HP (kW) @ Rated RPM |
276 hp (205 kW) @ 2100 per SAE |
| Official PTO HP (kW) @ Rated RPM |
TBD- Nebraska Test |
| @ Standard PTO @ Eng RPM |
TBD- Nebraska Test |
| Maximum @ Eng RPM |
TBD- Nebraska Test |
| Advertised Engine HP (kW) @ Rated Speed |
335 (246) @2100 per SAE |
| Max Unballast Drwbr HP (kW) @ Eng RPM |
TBD- Nebraska Test |
| Maximum Torque (PTO) @ RPM, lb-ft (Nm) |
TBD- Nebraska Test |
| Max Torque Rise (80% Rtd Spd) @ Eng RPM |
TBD- Nebraska Test |
| Maximum Torque Rise % (PTO) @ Eng RPM |
TBD- Nebraska Test |
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: |
|
| PTO @ Rated Eng RPM |
TBD- Nebraska Test |
| Standard PTO Speed @ Eng Speed |
TBD- Nebraska Test |
| Maximum PTO Power @ Eng RPM |
TBD- Nebraska Test |
| Maximum Engine Power @ Eng RPM |
TBD- Nebraska Test |
| Max Unballasted Drawbar Power @ Eng RPM |
TBD- Nebraska Test |
| 75% Load, Full Engine RPM (Unballasted) |
TBD- Nebraska Test |
| 75% Load @ Reduced RPM (Unballasted) |
TBD- Nebraska Test |
| Transmission |
|
| Std. Transmission; Forward/Reverse |
PowerShift, 16F/4R |
| Opt. Transmission; Forward/Reverse |
IVT |
| Reverser |
Optional left hand or right hand with IVT |
| On-the-Go Shifting (Yes/No/Partial) |
Yes |
| Clutch; Wet/Dry |
Wet |
| Creeper |
Yes, IVT |
| Power Take-Off (PTO) |
|
| Standard |
1-3/4-in. 20 spline 1000 |
| Optional |
1-3/4-in., 20-spline, 1,000-rpm with 1-3/8 in. 540*/1000 rpm gearcase |
| PTO Speeds @ Engine RPM |
1000 @ 2003 |
| PTO Actuation |
Electrohydraulic |
| Hydraulics |
|
| Type |
Closed center; pressure and flow compensated |
| Pump Rated Output, GPM (L/min.) |
--- |
| Standard |
60 (227.1) |
| Optional |
N/A |
| Rated Flow @ One SCV, GPM (L/min.) |
35 (132) |
| Max Output @ SCV Couplers, GPM (L/min.) |
TBD- Nebraska Test |
| Maximum Operating Pressure, PSI (kPa) |
2958 (20,400) |
| Maximum Hydraulic Power, HP (kW) |
TBD- Nebraska Test |
| Hitch Draft Control Load Sense Type |
Electrohydraulic |
| Remote Control Valves Available |
4 standard (3 or 5 optional) |
| Hitch Category (SAE Designation) |
4N/3 |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. |
--- |
| OECD |
TBD - Nebraska Test |
| Standard |
18,300 (8,301) |
| Optional |
N/A |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) |
--- |
| Standard |
N/A |
| Optional |
N/A |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) |
--- |
| Standard |
N/A |
| Optional |
N/A |
| Sensing Type |
Electrohydraulic |
| Joystick SCV Control |
Optional |
| Final Drive |
|
| Type |
Inboard planetary |
| Differential Controls |
Electrohydraulic |
| Availability |
--- |
| Front |
--- |
| Front & Rear |
Front and rear |
| Engage On-the-Go Rear Differential Lock |
Yes |
| Axle Type |
Bar with rack and pinion |
| Brakes, Type and Control |
Hydraulic wet disk |
| Operator Station |
|
| Rollover Protective Structure, OOS |
--- |
| Rigid - Foldable - Telescopic |
Rigid (cab) |
| Platform - Flat/Straddle |
Flat |
| Gearshift Location - Console/Floor |
CommandArm |
| Cab |
--- |
| Doors |
1 on left side |
| Platform - Flat/Straddle |
Flat |
| dB(A) Rating |
TBD - Nebraska Test |
| Seat Suspension System |
Air standard (ActiveSeat optional) |
| 2WD Dimensions |
|
| Wheelbase, in. (mm) |
N/A |
| Front Tread Range, in. (mm) |
N/A |
| Rear Tread Range, in. (mm) |
N/A |
| Minimum Rear Tread Setting, in. (mm) |
N/A |
| Front Axle Clearance, in. (mm) |
N/A |
| Turning Radius w/Brakes, ft. (m) |
N/A |
| Turning Radius w/o Brakes, ft. (m) |
N/A |
| Unballasted Operating Weight, lb. (kg) |
N/A |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
N/A |
| MFWD Dimensions |
|
| Wheelbase, in. (mm) |
120.1 (3050) MFWD; 118.9 (3020) ILS |
| Front Tread Range, in. (mm) |
60-144 (1524-3657) depending on axle |
| Front Axle Clearance, in. (mm) |
27 (685.8) MFWD; 23.2 (590) ILS |
| Turning Radius w/Brakes, ft. (m) |
Varies by configuration. Refer to operator's manual |
| Turning Radius w/o Brakes, ft. (m) |
Varies by configuration. Refer to operator's manual |
| Limited Slip Differential |
Available on certain axles |
| Unballasted Operating Weight, lb. (kg) |
N/A |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
27,218 (12,346) MFWD; 30,252 (13,722) ILS |
| 4WD Dimensions |
|
| Wheelbase, in. (mm) |
N/A |
| Wheel Tread, Min. to Max. in. (mm) |
N/A |
| Turning Radius w/o Brakes, ft. (m) |
N/A |
| Nebraska Test Unballasted w/Duals, lb.(kg) |
N/A |
| Unballasted Weight, lb. (kg) |
N/A |
| Standard Tires |
|
| 2WD |
--- |
| Front |
N/A |
| Rear |
N/A |
| MFWD |
--- |
| Front |
420/85R34 |
| Rear |
480/80R50 |
| 4WD |
N/A |
| Track Widths |
N/A |
| Miscellaneous |
|
| Country of Manufacture |
Waterloo, IA USA |
| Ballasting Restrictions, lb. (kg) |
Refer to operator's manual |
| *Notes |
Updated: 10/13/2010 |
